Materials
Our material inventory is extremely wide:
Cast irons (incl. HiSi, ADI & SiMo)
Steels (including Duplex)
Aluminum
| CAST STEELS | Number | Tensile Strenght Rm(N/mm2)min. | 0,2% Proof Strenght Rp 0,2 (N/mm2)min. | Elongation A(%)min. |
|---|---|---|---|---|
| Steel castings for general engineering uses (EN 10293) | ||||
| G24Mn6 + QT1 | 1.1118 | 700 | 550 | 12 |
| G26CrMo4 + QT1 | 1.7221 | 600 | 450 | 16 |
| G10MnMoV6-3 + QT3 | 1.5410 | 520 | 400 | 22 |
| Dublex Stainless Steel (ASTM A890) | ||||
| A890 Grade 5A | 1.4469 | 690 | 515 | 18 |
| A890 Grade 3A | 1.4468 | 655 | 450 | 25 |
| Austenitic Stainless Steel (ASTM UNS S32654 & EN10088) | ||||
| 654SMO | 1.4652 | 600 | 350 | 35 |
| X2CrNiMo17–12–2( AISI 316L) | 1.4404 | 520 | 220 | 40 |
| Martensitic Stainless Steel (ASTM A747 & EN10088) | ||||
| A747 CB7Cu-2 | 1.4525 | 1170 | 1000 | 5 |
| X15Cr13 | 1.4024 | 650 | 450 | 14 |
| Heat Resistant Steel Castings (UNE36017-85 & EN10295 ) | ||||
| X15CrNiSi25-20 | 1.4841 | 815 | 796 | 44 |
| GX40NiCrSiNb35-18 | 1.4807 | 420 | 220 | 4 |
| CAST IRON EN 1561, 1563, 1564, 16124 & ASTM A 532 | Tensile Strenght Rm(N/mm2)min. | 0,2% Proof Strenght Rp 0,2 (N/mm2)min. | Elongation A(%)min. | Brinell Hardness |
|---|---|---|---|---|
| Grey Irons (EN 1561) | ||||
| EN-GJL-150 | 150-250 | 98-165 | 0,8 to 0,3 | ~135…~200 |
| EN-GJL-200 | 200-300 | 130-195 | 0,8 to 0,3 | ~150…~250 |
| EN-GJL-250 | 250-350 | 165-228 | 0,8 to 0,3 | ~175…~255 |
| EN-GJL-300 | 300-400 | 195-260 | 0,8 to 0,3 | ~180…~275 |
| Ductile Irons (EN 1563) | ||||
| EN-GJS-400-18 | 400 | 250 | 18 | ~130…~175 |
| EN-GJS-400-15 | 400 | 250 | 15 | ~135…~180 |
| EN-GJS-450-10 | 450 | 310 | 10 | ~160…~210 |
| EN-GJS-500-7 | 500 | 320 | 7 | ~170…~230 |
| EN-GJS-600-3 | 600 | 370 | 3 | ~190…~270 |
| EN-GJS-700-2 | 700 | 420 | 2 | ~225…~305 |
| EN-GJS-800-2 | 800 | 480 | 2 | ~245…~335 |
| Solid solution strengthened ferritic spheroidal graphite cast irons (EN 1563) | ||||
| EN-GJS-500-14 | 500 | 400 | 14 | ~185…~215 |
| EN-GJS-600-10 | 600 | 470 | 10 | ~200…~230 |
| Ausferritic spheroidal graphite cast irons (EN 1564) | ||||
| EN-GJS-900-8 | 900 | 600 | 8 | ~280…~340 |
| EN-GJS-1050-6 | 1050 | 700 | 6 | ~320…~380 |
| EN-GJS-1200-3 | 1200 | 850 | 3 | ~340…~420 |
| Low Alloyed Ferritic Spheroidal Graphite Cast Iron For Elevated Temperature Applications (EN 16124) | ||||
| EN-GJS-SiMo50-10 | 600 | 500 | 3 | ~210…~260 |
| Abrasion-Resistant Cast Iron | ||||
| A532 III A Level 1 | Requirements (Chemical composition and Hardness ) based on needed HT condition & A532 |